• <table id="0qqq2"></table>

    Home>Product Center>Micro-modules


    • title
      Contact Us
      Address:Rm. 2-20901, Tsinghua Science Park, Technology Road 65, High-tech District, Xi'an, Shaanxi Province, China, 710075
      Tel:86-029-8844 4525
      86-029-8868 8901
      Fax:86-029-8868 8683

      MCP high voltage power supply

      Maximum output voltage(KV):0.1,0.2,0.3,0.4,0.5,0.6,0.8,1,1.1,1.25,1.5,2


      1.Models from 0.1KV to 2kV, 0.5W to 2W

      2. Low ripple and noise <5mV p-p

      3. high stablity 0.001% per hour

      4. low temperature coefficient 0.001%/ ℃

      5. Arc and short-circuit protection

      6. External potentiometer or external voltage to set

      7. small size,printed circuit board mounting

      8. positive and negative output

      9. six-sides shielding and has strong anti-interference

      10. OEM customization available


    Product introduction



    Wisman MCP module high-voltage power supply is a special ultra-low noise, high stability, and miniaturized module for photomultiplier tubes, mass spectrometers, and electron microscopes. The price is competitive. The MCP series is a regulated, versatile, modular HV power supply used in a wide variety of applications including photomultiplier tube, laser power supply, RF power supply, ionization chamber, proportional counter tube, Geiger-Miller (GM) counter tube, electrophoresis, lens, mass spectrometer, detector, microchannel plate, scintillator, electron and ion beams, Electrostatic printing, high voltage bias, medical chemical industry, scientific experiments, industrial applications. The MCP series is a printed circuit board mounted high-voltage power supply with a small size and ultra-high stability. The MCP series has protection features such as over-current protection and short-circuit protection. they are an excellent choice when you require a highiy stable output, which can be controlled using either an external control voltage or external variable resistor. With a diverse range of models up to 2KV/1W, you will find something for nearly every requirement.


    APD(Avalanche Photo Diode)
    Electron Multiplier
    Hibrid Photo Detector
    Bar Code Scanners
    Bomb Detectors
    Cellular Electrophoresis
    E-chuck(Electrostatic Chuck)
    ESD(Electrostatic Discharge Testing)
    Flow cytometry
    FPD(Flat Panel Ditector)
    Gamma Cameras
    Geiger Counter
    GM Tubes(Geiger Mueller Tubes)
    Hi Pot Testing
    Ion Mobility Spectrometry(IMS)
    Leak Detector
    PMT,MM,radiation counter
    Electron Beam/Ion Beam
    Mass spectrometry
    PhotoMultiplier Tubes
    Electron Guns
    Ion Guns
    Nuclear Instruments
    Electrostatic lenses
    Microchannel Plates

    Input Voltage :
    Input Current:
    with no load:15mA
    with full load:95mA
    Variable Output Voltage Range:
    0 to 2KV or 0 to -2KV
    Output power:0.5W,1W.2W
    Line Regulation :0.001% typical
    Load Regulation :0.01% typical
    Stability: 0.001%/hour.
    Ripple / Noise (p-p):
    0.001(maximum voltage and maximum current)
    Output Voltage Control:
    By external controlling voltage (0 V to +5 V)or external potentiometer  (20 kΩ ±2.5 kΩ)
    Controlling Voltage Input Impedance:100KΩ

    Output Voltage Rise Time : 50ms(0-99%)
    Temperature Coefficient:



    Working temperature: 0℃ to 50 ℃

    Storage temperature: -20℃ to 70 ℃
    working humidity:below 80%  non-condensing.

    storage humidity: below 80%  non-condensing.

    Protective Functions:
    Units protected against reversed power input, reversed / essive controlling voltage input, continuous overloading / short circuit in output
    D45.5 X W25 X H12
    25g(1.09 OZ), typical

    CE MARK.png

    For information concerning our high voltage products, please call at 086-029-33693480 or visit our website www.chaosthetic.com

    Wisman advances medical care, industrial processes, quality control, scientific research, security and telecommunications by providing innovative high voltage power supplies including micro-modules high voltage power supply, modules high voltage power supply, X-ray generator, rack mount voltage power supply, special customized high voltage power supply, high voltage accessories, etc. that enable equipment manufacturers to improve their systems’ performance, reliability, cost and bottom line. Power range from 100mW to 200kW, voltage range from 60V to 500kV. The application fields of Wisman products cover medical, industrial, semiconductor, safety, environment, analytical instruments, scientific research and other fields. You can purchase a variety of specifications in one-stop high-voltage power supplies from Wisman. We have a high-voltage power supply research and development team, high-voltage power supply development software and software for testing high voltage insulation technology and zero current resonance technology, making our high voltage power supplies maintain high stability, low ripple, excellent in EMC. Our products are compact, highly efficient with a long operating life.

    Wisman high voltage power supplies are competitively priced and a great idea for OEM customers.

    < Back Home   

  • <table id="0qqq2"></table>